Energie- und Gebäudetechnik
Tel.: 09185 9401-0
Fax. 09185 9401-50
The Burkhardt wood gas generator V 4.50, together with the CHP smartblock 50T delivers electrical and thermal energy from wood pellets. This way we are able to generate 110 kW heat and 50 kW of electricity.
The V 4.50 works according to the same principle as its big technical brother, the V 3.90, namely by way of parallel flow gasification, during which fuel and air are fed to the gas reactor from below in a controlled way and are dosed with such precision that the pellets fluidise in certain areas without being carried away. Due to the uniform size of the wood pellets, the fluidised bed stabilises on its own. An efficient gas-Otto CHP takes over the electricity generation from the wood gas (syngas).
The Burkhardt V 4.50 is manufactured in a modular design. The gas reactor, gas heat exchanger, gas filter, and all other relevant components are mounted on the base plate of the gasifier and piped ready for connection. The dust storage of the flare line is also attached to the base plate, saving space. Since no condensate is produced in the V 4.50, there is no need for a collecting tank. The same is true for a shavings screen, since the accruing shavings are also burnt within the reactor.
Consuming approximately 40 kg/h, the system generates about 50 kW of electricity and about 110 kW of heat respectively. This means that 1 kg of wood pellets yields 1.25 kW of electricity and 2.75 kW of heat.